Fitch Fuel Catalyst

We are excited to be a distributor of an excellent fuel cost reducer to our customers, The Fitch Fuel Catalyst!

Fitch Fuel Catalyst is UL Certified and available for all commercial and residential oil burners. Residential & multi-family applications are warranted for 5 years and commercial applications for 10,000 operating hours.

Fitch Fuel Catalyst is installed in the fuel delivery line and is a maintenance-free device. It will improve your combustion which also means cleaner burning in the fuel. Your heating appliance will stay cleaner, maintain a higher degree of operating efficiency and require less maintenance.

If your oil savings are less than 10%, you may return the unit for a complete refund at any time up to one year after installation.

Results from installing the Fitch Fuel Catalyst are:

• Stack temperature increase
• Increased heat output per gallon of fuel burned
• Reduces nozzle size as a result of less fuel required to obtain the same BTU output.

What does this mean to you? A more efficient heating system, less fuel consumed, and you reduce your heating costs.

Actual Results

We've collected results and savings from actual installs of the Fitch Fuel Catalyst. Take a look at actual savings people here in Maine are experiencing!

View our Local Install Data

How it Works

The Fitch Fuel Catalyst is a true catalyst where: Catalysis is the process in which the rate of a chemical reaction is either increased or decreased by means of a chemical substance known as a catalyst. Unlike other reagents that participate in the chemical reaction, a catalyst is not consumed by the reaction itself. In other words it creates a chemical without taking away or adding anything to the substance it is changing.

As fuel passes over the surface of the disks (the catalyst) inside the container, it acts as a "cold cracking" device and breaks down the long chain hydrocarbons to smaller rounder segments allowing fuel to burn more completely. This represents the change we see in stack temperatures where the degrees increase after the addition of the Fitch unit. To correct and lower the temperatures back to pre installation degrees, we lower the size of the nozzle and that is where the fuels savings occur. In some cases we have had better than 15% reduction in nozzle size.

Cracking is the function used to break down crude oil into the different types oil products. This is done through heating crude oil and each level of temperatures will produce specific product types — i.e. bunker oil, home heating oil, diesel, kerosene, gas, propane, etc.

Savings Chart

Testimonials

MB, homeowner, Damariscotta, ME:
“I only wish it had been available sooner!” “......it is making a huge difference in my fuel oil consumption.”

GZ, homeowner, Waldoboro, ME:
“I am convinced that it really works. I had to check my fuel gauge because I thought it was broken.”

WP, Waldoboro, ME:
“The Fitch Fuel Catalyst will save my organization about $14,000 in oil costs for the first year. I encourage everyone to purchase a Fitch Fuel Catalyst and have it installed today!”

JF, marine business, Camden, ME:
“A Peerless Jottw275 Boiler with a Beckett burner rated at 2.75 gph, equipped with a 2.25 nozzle. The stack temperature increased 50 degrees after the Fitch was installed. The nozzle was reduced to bring greater savings.”

Stay warm this winter and save money, call us today to find out more about the exciting Fitch Fuel Catalyst!

This product is UL listed, EPA certified, approved for sale and use in California, and has been tested extensively by independent laboratories in New York, Connecticut, and other states.